SHOP ALL OF OUR CREEP FEEDERS
This large, one-piece feeder is very difficult to ship economically in small quantities.
Please call, email, or chat with us below for a quote with shipping to your address today
500-Pound Creep Feeder for Sheep and Goat Kids
This feeder is intended to make supplemental feed accessible to smaller animals while helping limit access by larger animals. Its removable entry bars allow the opening to be adjusted down to approximately six inches, but the correct setting depends on the animals using the feeder. Observe feeding behavior and adjust the entry arrangement as kids grow.
Feeding Access, Trough Height and Placement
The listed trough rim is approximately 11 inches above ground level, with a pan depth of about five inches. Place the feeder on stable, level ground and allow sufficient room around the entry area to avoid crowding. Inspect the trough regularly for feed buildup, moisture and spoiled material. Use a ration formulated for the species and age group; sheep and goats have different mineral requirements.
Choosing Between 500-, 1,000- and 2,000-Pound Feeders
The 500-pound model may suit smaller groups and lower feed storage needs. The 1,000-pound feeder offers a larger, double-sided option, while the 2,000-pound feeder is intended for higher-volume feeding. Compare animal access, footprint and delivered cost, not just nominal capacity.
Frequently Asked Questions
Will this feeder keep mature animals away from creep feed?
The adjustable bars are designed to restrict access, but their effectiveness depends on animal size and the opening setting. Check use directly rather than assuming every adult is excluded.
Can it ship by standard parcel delivery?
No. The existing listing describes a large one-piece feeder that can be expensive to ship individually. Ask for a freight quote or discuss pickup near Fort Worth, Texas.
How do I keep supplemental feed in good condition?
Inspect the feed frequently, remove wet or spoiled material and clean the trough as needed. Keep the feeding site well drained and follow the feed manufacturer's storage guidance.
500-Pound Sheep and Goat Creep Feeder Construction and Dimensions
This one-piece sheep and goat creep feeder has a listed 500-pound feed capacity, grey enamel finish and removable front entry bars. Adjusting the entry openings can help smaller lambs and kids access supplemental feed while discouraging larger animals from entering. Check actual clearance for the breed and growth stage before leaving the feeder in use.
The trough rim is approximately 11 inches above the ground and the pan is about five inches deep. These dimensions help buyers evaluate access for their animals and whether the feeder fits an existing pen or feeding area. Monitor smaller animals to make sure they can reach the ration without climbing into the trough.
Planning a Creep-Feeding Area for Lambs and Goat Kids
A dedicated creep-feeding space allows young animals to eat supplemental feed separately from mature ewes or does. Place the feeder where young animals can find it easily, but avoid narrow entrances that encourage pushing or crowding. Check access from all sides of the pen and ensure that gates, fencing and removable bars cannot trap heads or limbs.
Introduce feed gradually according to your livestock nutrition plan. Because sheep are especially sensitive to excess copper, do not assume a goat ration or mineral mix is suitable for sheep. Consult your feed supplier or veterinarian about species-specific formulations, age, and intake targets.
Daily Operation and Maintenance
Check feed levels, trough cleanliness and entry-bar security during routine chores. Remove wet, moldy or stale feed promptly. Keep the feeder on a level, well-drained site, and inspect the enamel finish and metal edges for wear or damage. Adjust access as animals grow and review whether the available feeding space remains adequate for the group.
Freight Quotes and Farm Pickup
This is a large, one-piece feeder, so shipping a single unit can be costly. Barn World can help evaluate freight delivery to your ZIP code or discuss the listed pickup option near Fort Worth, Texas. Include the quantity, destination and any unloading limitations when requesting a quote.
Feeder Specifications
- 6 ft x 4 ft 6" x 3 ft 8"
- Listed equipment weight: 500 pounds (confirm with Barn World when arranging freight)
- 500-pound feed capacity
- Also available is a double-sided creep feeder at 1,000 pounds
- Click here to see the largest 2,000-pound capacity feeder.
- Removable Creep Feeder Entry Bars get as small as 6" wide
- The feeding pan is 11" above the ground and about 5" deep
- Available for pick up near Ft Worth, TX
For larger needs, consider the double-sided creep feeder with a 1,000-pound capacity, or our colossal 2,000-pound capacity, double-sided creep feeder.
Although these large feeders are difficult to ship, they are conveniently located for pickup near Ft Worth, TX.