Please chat with us below, call, or email for a quote on this special order item.
Repair the Hopper Section Without Automatically Replacing the Bin
This kit provides nine replacement hopper-wall sections for a matching 9-foot-diameter bulk feed bin. The listed material is 18-gauge, G-90 galvanized steel, and hardware and sealant are included. It is intended for repairing the tapered hopper section beneath the storage body, rather than replacing the entire feed bin.
The existing listing identifies older Sioux Steel, Pax and Brock applications. Brand and diameter alone do not confirm fit: compare the sheet dimensions, hole pattern and connections with your existing hopper before ordering. A repair makes sense only when the remaining bin and supporting structure are suitable for continued service.
Start with the Fit Check
| Check | Listed 9-Foot Kit Detail |
|---|---|
| Hopper sections | 9 |
| Sheet length | 91-1/4 inches |
| Bolt-hole spacing | 3-1/8 inches along the listed top and bottom patterns |
| Top hole count | 13 |
| Bottom hole count | 3 |
| Steel | 18-gauge, G-90 galvanized |
| Included items | Replacement sheets, hardware and sealant |
Use these listed measurements as the starting point for matching your bin, not as a substitute for checking the actual connections. Confirm how the sheet length is measured on the reference diagram, along with the top and outlet-end hole patterns.
Other Kit Sizes in the Existing Range
| Bin Diameter | Sections | Sheet Length | Hole Spacing | Top Holes | Bottom Holes |
|---|---|---|---|---|---|
| 6 feet | 6 | 52 inches | 3-1/8 inches | 13 | 4 |
| 7 feet | 6 | 85-3/4 inches | 3-1/8 inches | 15 | 5 |
| 9 feet | 9 | 91-1/4 inches | 3-1/8 inches | 13 | 3 |
| 12 feet | 12 | 127 inches | 3-1/8 inches | 13 | 3 |
The comparison identifies separate kits. Select the one that matches your hopper; a different diameter's sheet count or bolt pattern should not be used to identify this 9-foot kit.
Sheet and Connection References
Hopper Wall Section
Taper-Sheet and Leg Connection Reference
When Is a Hopper Repair Worth Considering?
The hopper is the tapered lower part of the bin that directs feed toward the outlet. Over time, a damaged or corroded hopper section may become the part that needs attention even when other portions of the bin remain serviceable. Replacing matching sheets can provide a way to address that localized problem while retaining usable components.
The first decision is the extent of the damage. A replacement sheet kit addresses the hopper walls supplied in the package. It does not repair deteriorated legs, damaged bracing, compromised wall rings or unsuitable foundations. Have the condition of those parts assessed before deciding that sheet replacement is the appropriate repair. New steel in one area does not establish the strength or load capacity of the assembled bin.
Why the Hole Pattern Matters as Much as Diameter
Two bins with the same nominal diameter may use different sheet layouts, outlet arrangements or connection details. A matching bolt pattern helps the replacement sheets align with the parts you intend to retain. The listed top and bottom hole counts are therefore useful identification details, not simply extra dimensions in the specification table.
Photos can help clarify an older bin when the model identification is incomplete. Record the upper hopper connection, the outlet end and the relationship between the sheets and leg attachments. Confirm uncertain measurements before placing a special order rather than assuming that a broadly similar hopper will accept the kit.
What Galvanized Sheets, Hardware and Sealant Contribute
The galvanized coating provides corrosion resistance for the replacement steel. That protection is useful in a feed-storage environment, but it does not make the sheets permanently rust-proof. Moisture, damaged coatings and conditions at the joints still affect service life.
Hardware and sealant are included to support assembly of the matching replacement sections. Correct alignment and joint preparation remain important. Follow the supplier's requirements for fastening and sealing; the presence of new bolts and caulk does not correct an incompatible connection or a damaged supporting part.
Plan the Repair Before Taking the Hopper Apart
Arrange the work around an empty bin, suitable access and the support required for the structure during repair. A hopper replacement is structural maintenance, so use an installer qualified for the bin and its condition. Obtain the applicable repair instructions and establish how retained components will be supported before any disassembly.
Include unloading, lifting equipment, installation labor and any related parts in the repair estimate. These practical costs help you weigh repair against replacement more accurately than the sheet-kit price alone. If the inspection identifies broader deterioration, account for it before committing to a hopper-only repair.
Send the Right Details for a Special-Order Quote
- Identify the bin: Provide the brand, model if known and nominal diameter.
- Record the hopper: Send photos and measurements of the sheets, bolt patterns and outlet connection.
- Describe the repair: Explain which sections are damaged and which components will remain.
- Plan delivery: Include your address and available unloading equipment when requesting freight.
Questions Buyers Ask About This Repair Kit
What comes with the 9-foot kit?
The listing includes nine hopper-wall sections in 18-gauge, G-90 galvanized steel, plus hardware and sealant. Confirm any additional parts required for your bin when requesting the quote.
Will it fit every 9-foot Sioux Steel, Pax or Brock bin?
No universal fit should be assumed. The listing references older designs, and the sheet dimensions and connection patterns must match the actual hopper. Send photos and measurements if you are uncertain.
Does this replace the straight wall rings?
No. This kit is for the tapered hopper section. Straight wall rings, roof panels, legs and other components are separate parts.
Do new hopper sheets restore the bin's original rating?
That cannot be determined from the kit alone. The condition of the complete structure, compatibility of the parts and installation all matter. Have the bin assessed rather than assuming a sheet replacement certifies its capacity.
Is a hopper repair always less expensive than a new bin?
Not necessarily. Include freight, labor, equipment and other damaged components in the comparison. A targeted repair can be worth evaluating when the retained structure is suitable, but it is not the best option for every bin.
Why do I need a quote before ordering?
This is a special-order item. A quote gives Barn World an opportunity to review the requested configuration, fit information and delivery requirements before the order proceeds.
Contact Barn World with your bin information and repair photos to discuss the matching kit and shipping.