SEE ALL OF OUR CREEP FEEDERS
These sheep creep feeders provide dedicated supplemental feeding access for lambs while helping restrict entry by larger sheep. Available in 600-pound single-sided and 1,200-pound double-sided configurations, they combine low feeding troughs, narrow creep-pen openings and welded steel construction for practical use in sheep operations.
The folding creep pen uses seven-inch entry openings intended to allow younger animals to reach the feeding area while discouraging mature sheep from entering. The feeder is mounted on skids for positioning and can be paired with the folding pen to establish a designated lamb-feeding station.
Choose the capacity that fits your flock size, available feeding space and refill schedule. For other livestock feeding designs, browse Barn World's creep feeders and cages.
Sheep Creep Feeder Specifications
| Sheep Creep Feeder Specifications | |
|---|---|
| Available Capacities | 600 lb and 1,200 lb |
| 600 lb Configuration | Single-sided feeding |
| 1,200 lb Configuration | Double-sided feeding |
| Intended Animals | Lambs and young sheep |
| Trough Design | Lower feeding height designed for lamb access |
| Creep Pen Openings | 7 inches |
| Listed Pen Entries | 8 |
| Pen Material | 1-inch square, 16-gauge steel |
| Construction | Welded steel frame |
| Base | Skid-mounted |
| Pen Configuration | Folding creep pen |
| Delivery | Freight quote recommended before ordering |
Important: The listed capacities describe feed storage, not the number of lambs that can feed simultaneously. Actual feeding capacity depends on animal size, available trough space, access arrangement and management practices.
How a Sheep Creep Feeder Works
Creep feeding provides young lambs with access to a supplemental ration in an area that is more difficult for mature animals to enter.
A creep pen creates a restricted entrance, while the feeder stores and presents the ration within the designated feeding area.
This arrangement can be useful when lambs require access to a feed formulation that differs from the ration offered to mature ewes.
The seven-inch openings are intended to limit access by larger animals, but their effectiveness depends on the size and breed of the sheep. Observe the flock to confirm that lambs can enter comfortably and mature animals are appropriately restricted.
Why Separate Feeding Access Matters
Young lambs may have difficulty competing with mature sheep at shared feeding locations.
A dedicated creep-feeding area provides a separate location where lambs can approach supplemental feed without having to compete directly at an adult feeding trough.
The benefit depends on proper pen design, sufficient feeding space and the animals' willingness to use the area.
600 lb Single-Sided Sheep Creep Feeder
The 600-pound model provides a single-sided feeding arrangement and is the smaller-capacity option in this product family.
It may suit operations where the number of lambs, expected feed consumption and refill access do not justify the larger double-sided feeder.
Consider the available pen space and how animals will approach the feeding side. Position the feeder so that lambs can enter, feed and leave without being forced into congested corners.
600-pound sheep creep feeder with a single-sided feeding area.
1,200 lb Double-Sided Sheep Creep Feeder
The 1,200-pound model uses a double-sided feeding configuration, providing feeding access on both sides of the feeder.
This arrangement may be useful for larger groups where additional access and greater feed storage are priorities.
Double-sided feeding can distribute animals along two feeding areas rather than concentrating access along one side.
However, adequate surrounding space is still necessary. Both sides must remain accessible for the configuration to provide its intended benefit.
1,200-pound double-sided sheep creep feeder.
Choosing Between 600 lb and 1,200 lb Capacity
The best feeder size depends on more than the amount of feed the hopper can store.
| 600 lb Feeder | 1,200 lb Feeder |
|---|---|
| Single-sided feeding | Double-sided feeding |
| Lower listed feed capacity | Higher listed feed capacity |
| May suit smaller feeding groups | May suit larger feeding groups |
| Requires access along the feeding side | Requires usable access on both feeding sides |
| May require more frequent refilling | May allow longer intervals between refills |
Refill frequency depends on ration density, daily consumption and the number of animals using the feeder.
A larger hopper does not automatically provide enough feeding space for a larger flock. Evaluate the actual trough dimensions and animal access before selecting a model.
Seven-Inch Creep Pen Openings
The folding creep pen is described as having eight entries with seven-inch openings.
These openings are designed to permit access by smaller lambs while limiting entry by larger sheep.
Opening size is particularly important because sheep vary in body size, breed and stage of growth.
An opening that works for one group may not be suitable for another. Check that lambs can pass through without excessive squeezing, climbing or becoming trapped.
Monitor Entry as Lambs Grow
As lambs gain size, an opening that was previously comfortable may become restrictive.
Inspect the entry area regularly and observe how animals enter and leave. If lambs hesitate, crowd or become caught, reevaluate the arrangement before continued use.
Do not assume the pen is suitable for every age or breed simply because it is marketed as a sheep creep feeder.
Low Trough Height for Lamb Feeding
The feeder has a lower trough height designed to make supplemental feed accessible to lambs.
A feeding trough that is too high can make it difficult for smaller animals to reach their ration. A trough positioned appropriately for the animals allows more natural feeding access.
The original listing does not provide an exact trough-height measurement. Confirm the dimension before ordering if it is important for your particular lamb size or feeding setup.
Welded Steel Construction and Skid Base
The feeder uses welded construction and a strong steel frame. The creep pen is listed as being made from one-inch square, 16-gauge steel.
Welded construction provides an integrated frame, while the skid base supports the feeder and facilitates positioning.
Inspect welded joints, frame components and skid surfaces periodically for damage, wear or corrosion.
Although the feeder is designed for repositioning, movement should be performed using appropriate equipment and manufacturer-approved handling methods.
Emptying the feeder before relocation can reduce the load and help prevent unnecessary stress on the frame.
Setting Up a Creep-Feeding Area
Good placement helps lambs find and use the feeder while allowing the operator to refill and inspect it efficiently.
- Select stable ground. Choose a reasonably level location with adequate drainage.
- Plan the approach. Avoid narrow corners where animals may crowd at the entrance.
- Allow feeding clearance. Keep the required feeding side or sides accessible.
- Inspect the pen. Confirm that entry openings and folding sections are properly positioned and secured.
- Introduce the ration. Follow a feeding plan appropriate for the lambs' age and nutritional needs.
- Observe animal behavior. Confirm that lambs can enter, reach the trough and exit safely.
- Maintain the area. Remove spoiled feed and address mud or standing water.
Reducing Crowding and Competition
Access to supplemental feed is important, but the number of available entry points and feeding positions must be suitable for the flock.
Even with eight listed creep-pen entries, animals may gather at preferred locations or crowd during feeding.
Observe the group to determine whether smaller or less assertive lambs are consistently displaced.
Where crowding persists, consider changes to feeder placement, animal grouping or the number of feeding stations.
Choosing the Right Feed for Lambs
A creep feeder stores and dispenses feed; it does not determine the correct nutritional formulation.
Select a ration appropriate for the lambs' age, growth stage and overall feeding program.
Sheep have particular mineral requirements, including sensitivity to excessive copper. Do not assume that feed or mineral supplements formulated for goats or cattle are suitable for sheep.
Consult a qualified livestock nutritionist, veterinarian or feed supplier when developing a creep-feeding program.
Introducing Supplemental Feed
Introduce new feed according to the feeding program and monitor consumption.
Sudden ration changes can cause digestive problems. Avoid treating the feeder's capacity as a target amount that animals should consume.
Feed intake should be managed according to animal needs and professional feeding guidance.
Keeping Feed Fresh and Accessible
Check the feeder regularly for moisture, clumping, contamination and spoiled feed.
Stored feed can deteriorate if exposed to water or held for too long under unfavorable conditions.
Remove unsuitable material rather than covering it with fresh feed.
Keep the trough clean and check whether feed is flowing or being presented consistently.
Daily Inspection and Maintenance
Routine inspections help identify problems before they interfere with feeding.
- Check feed levels and ration condition.
- Remove wet, stale or contaminated feed.
- Inspect the trough for accumulated debris.
- Confirm the creep-pen entries remain secure.
- Check for sharp edges or damaged steel.
- Inspect welds, skids and folding components.
- Observe whether lambs can enter and exit comfortably.
- Reevaluate access as the animals grow.
Maintain the feeder according to the manufacturer's instructions and address damaged components before continued use.
Sheep Creep Feeders Versus Goat Creep Feeders
Sheep and goat creep feeders may look similar, but entry dimensions and feeding requirements can differ.
The sheep feeder described here has seven-inch creep-pen openings. Barn World also lists a goat creep feeder with smaller 4.5-inch openings.
Compare the actual size of the animals and the intended pen configuration before selecting either design.
Also remember that sheep and goats have different nutritional requirements. A shared feeder design does not make the same ration appropriate for both species.
Freight Shipping and Delivery Planning
These are large livestock feeders, and shipping costs depend on the selected configuration, quantity and destination.
Barn World recommends requesting a delivered freight quote before placing an order.
When contacting Barn World, provide:
- Selected 600 lb or 1,200 lb configuration.
- Quantity required.
- Delivery ZIP code.
- Commercial, farm or residential delivery location.
- Any access restrictions for freight vehicles.
- Available unloading equipment.
Confirm the current dimensions, included pen configuration and unloading requirements before finalizing the order.
Frequently Asked Questions
What capacities are available?
This sheep creep feeder is offered in 600-pound and 1,200-pound configurations.
What is the difference between the two models?
The 600-pound model uses a single-sided feeding arrangement. The 1,200-pound model is double-sided and provides greater listed feed storage.
How wide are the creep-pen openings?
The original product specifications list seven-inch openings.
How many pen entries are provided?
The original listing identifies eight entries. Confirm the configuration supplied with the selected model.
Will the pen keep every adult sheep out?
Not necessarily. Effectiveness depends on the size of the animals and the actual opening dimensions. Observe the flock and verify the fit.
Is the trough designed for lambs?
Yes. The listing describes a lower trough height intended for young sheep.
Is the feeder made from steel?
Yes. It uses welded steel construction, and the pen is specified as one-inch square, 16-gauge steel.
Can the feeder be repositioned?
The feeder is mounted on skids for positioning. Use appropriate equipment and handling methods, preferably with the feeder empty.
Does the 1,200-pound feeder allow animals to feed from both sides?
Yes. The original description identifies the 1,200-pound configuration as double-sided.
Can I use goat feed in this sheep feeder?
The feeder's physical design does not determine ration suitability. Use feed formulated for sheep and consult qualified nutritional guidance, particularly regarding copper levels.
Can Barn World provide a freight quote?
Yes. Provide the selected feeder capacity, quantity, delivery ZIP code and any unloading requirements.
Order a Sheep Creep Feeder
These 600-pound and 1,200-pound sheep creep feeders provide dedicated supplemental feeding access for lambs with narrow pen openings, lower troughs and welded steel construction.
Select the single-sided or double-sided configuration based on your flock, feeding arrangement and expected refill needs.
Contact Barn World at (720) 238-2190 or Sales@BarnWorld.com for current availability, configuration details and a delivered freight quote.
For additional livestock feeding equipment, visit the creep feeder collection.